EN
ES
PT
SV
DE
TR
FR
Used for Boat Racing Car Tungsten Alloy Counterweight Cube Block Carbide Block
- Description
- step 1, wrapped carbide sqare parts in paper to avoid carbide sqare parts to broke
step 2, put the carbide sqare parts in inner small carton box
step 3, put the inner box into outter carton and fill the carton with foamed plastic
step 4, wrap the carton with packaging tape
step 5, you can choose any delivery way such as DHL,TNT,UPS ect.
- any port of China
| Grade | Density | T.R.S | Hardness | Performance & application recommended | Approx grade in China |
| g/cm3 | MPa | HRA | |||
| YM4A | 14.9 | 1850 | 92 | Fine grade alloy, with good wear resistance, used for processing blades,wear resistance parts etc. | YG4A |
| YM8 | 14.7 | 2400 | 89.5 | High bending strength, wear resistance lower than MK6A,used for processing blades, wear resistance parts etc. | YG8 |
| YM15 | 14.5 | 2500 | 87.5 | Used for punch dies,stamping dies and wear resistance parts. | YG15 |
| YM20 | 13.5 | 2800 | 85.5 | High bending strength, used for step dies and other stampings dies. | YG20 |
carbide bar is suitable for semifinishing the chilled cast iron, nonferrous metal and its alloy. It is also suitable for semifinishing and finishing the hardened steel and alloy steel.
size:
38.1*38.1*38.1mm (hotsale item) , estimated weight 1kg
47*47*47mm , estimated weight 2kg
51*51*51mm
25.4*25.4*25.4mm
20*20*20mm
12.7*12.7*12.7mm
Customized size is available also,Please advise the requested size if you can not found the requested size here
1, Soon after the order is confirmed, carbide forging die products will start to prepare the RTP powder as per customer’s requirement with our wet-grinding machine
2, Before mass production, we need to do a trial pressing and sintering using every mould, and we check the appearances and the sizes of carbide forging die samples with micrometer, projectors etc. to ensure that the requirements of the drawings can be met before batch production
3, Bulk production ,press the raw materials to shape blanks,and all carbide forging die blanks must be passed by semi finished inspection,
4, Then sinter blanks to finish (HIP) and finished products inspection, we have 10 sets of vacuum sintering furnace and 2 sets of HIP in the factory ensure the best quality and production capacity.
5, 1). cleaning/tumbling is to make the carbide forging die look more beautiful.
2).The carbide forging die can be ground according to customers’ order to a tolerance of +/-0.05
