EN
ES
PT
SV
DE
TR
FR
Mingri cemented tungsten carbide round pellet die mold
- Description
- Paper+paper boxes+exported wooden cartons or paper cases.
Mingri cemented tungsten carbide round pellet die mold
- any port in china
Some sizes of Dies Blanks/mm | |||
d | D | L | |
BD0131015 | 10 | 1.3 | 15 |
BD0171020 | 10 | 1.7 | 20 |
BD0171230 | 12 | 1.7 | 30 |
BD0211230 | 12 | 2.1 | 30 |
BD0211630 | 16 | 2.1 | 30 |
BD0241015 | 10 | 2.4 | 15 |
BD0241225 | 12 | 2.4 | 25 |
BD0291425 | 14 | 2.9 | 35 |
BD0291640 | 16 | 2.9 | 40 |
… | … | … | … |
Grade | Density g/cm3 | Hardness HRA | T.R.S Mpa | Performance&application recommended |
YG11 | 14.4 | 88.5 | 2420 | Forming or stamping dies for metal powders and nonmetal powders |
YG15 | 14.0 | 87 | 3000 | It is suitable for drawing steel tubes and rods under high compression ratio,manufacturing upsetting,punching and stamping tools under large stress |
YG20 | 13.5 | 85.5 | 2800 | It is suitable for manufacturing punching dies for watch parts,leaf spring of musical instrument,battery jars,small sized steel balls,screws,screw caps,etc |
YG16C | 13.9 | 85 | 2750 | It is suitable for impact-resistant forging dies |
YG18C | 13.7 | 84 | 2800 | It is suitable for impact-resistant forging dies,hot-forging dies and finishing rollers |
YG20C | 13.5 | 83 | 2850 | It is suitable for wear resistant or impact resistant dies |
YG22C | 13.3 | 82 | 2900 | It is suitable for nut forming dies and high impact-resistant dies |
YG25C | 13.1 | 81.5 | 2950 | It is suitable for stainless screw dies and semifinishing rollers |
Other grades and sizes can be offered as per customers' requirement | ||||
1, Soon after the order is confirmed, carbide forging die products will start to prepare the RTP powder as per customer’s requirement with our wet-grinding machine
2, Before mass production, we need to do a trial pressing and sintering using every mould, and we check the appearances and the sizes of carbide forging die samples with micrometer, projectors etc. to ensure that the requirements of the drawings can be met before batch production
3, Bulk production ,press the raw materials to shape blanks,and all carbide forging die blanks must be passed by semi finished inspection,
4, Then sinter blanks to finish (HIP) and finished products inspection, we have 10 sets of vacuum sintering furnace and 2 sets of HIP in the factory ensure the best quality and production capacity.
5, 1). cleaning/tumbling is to make the carbide forging die look more beautiful.
2).The carbide forging die can be ground according to customers’ order to a tolerance of +/-0.05
